Boiler Tube Cleaning Equipment

We are a well-established manufacturer of tube cleaning equipment, tube cleaning machine, dry tub cleaning equipment suitable for dry application & wet application. The different types of dry tube cleaning equipment that we offer includes wire brushes, tool head cutters, electrical tube cleaners and more. Precise, effective and cost-saving are the Tube Cleaning Equipment offered. The cleaning machine is easy to use & require little training / experience to operate. We supply variety of tube cleaning equipment, flexible shaft machine, tube cleaning machine, flexible shaft, flexible shaft tools, tube cleaners, flex shafts, flexible shafting equipment, flexible shafting machine etc.
 
FLEXIBLE SHAFT MACHINE (NFMSERIES)

It is a 3 phase electric motor (2800 rpm) mounted on 3 wheel trolley fitted with a carrying trolley. Horse power of motor is selected depen-ding upon the length & size of shaft, and type of scaling. Push button starter is provided to control the motor. Each machine is fully wired, carefully tested & fitted with a 10 ft. Length (Or longer if required) PVC cable to main supply.

Motors are available in enclosed system as well as in open system (i.e. Without covering of above motor.

Please contact us if your electrical specification is different from below mentioned. Machine for alternate supply are also available. 

Model No. Motor Power
HP kW
Electric Supply Speed RPM Tube I. D.
Mm. Inch
NFM -10 1.0 0.746

440 V
3 Phase
50 C/S A/C

1400 15.87- 22.0 5/8-0.82
NFM -30 3.0 2.238 2900 22.0- 38.10 0.86-1.1/2
NFM -50 5.0 3.730 2900 38.10-152.40 1.1/2-6.0
NIKSUFLEX' FLEXIBLE SHAFT (NFSSERIES)
It is used for cleaning of tube by transmitting power in terms of rotation from the motor unit to tool head cutter or brush within tube.

Inner Core : It is flexible wire with multiple wound opposite layer. It is made of high tensile spring steel or stainless steel (as per requirement) and passed through heat treatment processes to make it absolutely vibration free.

Outer Casing : It is flexible, double interlocked, circular rounded, made of galvanized steel strip, Special spring steel lining is provided within outer casing to avoid any friction between inner core & outer casing.

Connection : One end of shaft with machine end socket is attached to suitable motor and other end is attached to tool end.

INNER CORE DIA MM (INCH) 6.4MM
(1/4")
9.5MM
(3/8)
11.0 MM
(7/16)
13MM 15MM 19.0 MM
(3/4)
OUTER CASING MM (INCH) 14.5 MM
(0.57")
19.0 MM
(3/4)
22.0 MM
(7/8)
24.0 MM
(15/16)
29.0 MM
(1.14)
33.0 MM
(1.3)
LENGTH
Mtrs. Feet Sr. No. MODEL NO. MODEL NO. MODEL NO. MODEL NO. MODEL NO. MODEL NO.
6.0 20.0 1 NFS-101-20 NFS-102-20 NFS-104-20 NFS-105-20 NFS-106-20 NFS-107-20
7.5 25.0 2 NFS-101-25 NFS-102-25 NFS-104-25 NFS-105-25 NFS-106-25 NFS-107-25
8.0 27.0 3 NFS-101-27 NFS-102-27 NFS-104-27 NFS-105-27 NFS-106-27 NFS-107-27
9.0 30.0 4 NFS-101-30 NFS-102-30 NFS-104-30 NFS-105-30 NFS-106-30 NFS-107-30
10.0 33.0 5 NFS-101-33 NFS-102-33 NFS-104-33 NFS-105-33 NFS-106-33 NFS-107-33
12.0 40.0 6 NFS-101-40 NFS-102-40 NFS-104-40 NFS-105-40 NFS-106-40 NFS-107-40
15.0 50.0 7 NFS-101-50 NFS-102-50 NFS-104-50 NFS-105-50 NFS-106-50 NFS-107-50
18.0 60.0 8 NFS-102-60 NFS-104-60 NFS-105-60 NFS-106-60 NFS-107-60
20.0 65.0 9 NFS-102-65 NFS-104-65 NFS-105-65 NFS-106-65 NFS-107-65
25.0 82.5 10 NFS-102-82 NFS-104-82 NFS-105-82 NFS-106-82 NFS-107-82
30.0 100.0 11 NFS-102-100 NFS-104-100 NFS-105-100 NFS-106-100 NFS-107-100
Spare Inner Core Per Meter NIC-102 NIC-104 NIC-105 NIC-106 NIC-107
Spare Outer Casing Per Meter NOC-102 NOC-104 NOC-105 NOC-106 NOC-107
Spare Hand Piece NHP-102 NHP-104 NHP-105 NHP-106 NHP-107
 
TOOL HEAD CUTTERS
CT Series Tool Head Cutters

Purpose : For rapid removal of hard scale.

Description : It has 15 cutter wheels (4 straight wheels, 4 left wheel, 4 right wheel & 3 bevel wheels). They are spring loaded &selfexpanding.

Size : For tube I. D. From 31mm to 53mm.

Serial No. Tube I. D. Tool Head Cutters Wheel
Set of 15 rollers
Spare Arms
Mm. Inch
1 31.7 1.1/4 CT-10 CTW-1 CTA-1
2 33.3 1.5/16 CT-10A CTW-1 CTA-1
3 35.0 1.3/8 CT-11 CTW-1 CTA-1
4 36.5 1.7/16 CT-11A CTW-1 CTA-1
5 38.1 1.1/2 CT-12 CTW-2 CTA-2
6 39.7 1.9/16 CT-12A CTW-2 CTA-2
7 41.3 1.5/8 CT-13 CTW-2 CTA-2
8 42.9 1.11/16 CT-13A CTW-2 CTA-2
9 44.5 1.3/4 CT-14 CTW-3 CTA-3
10 46.0 1.13/16 CT-14A CTW-3 CTA-3
11 47.6 1.7/8 CT-15 CTW-3 CTA-3
12 49.2 1.15/16 CT-15A CTW-3 CTA-3
13 51.0 2 CT-16 CTW-3 CTA-3
   
T Series Tool Head Cutters  

Purpose : For cleaning straight and curved tubes as found in boiler, air heaters.

Description : This head cutter is provided with three wheels, one each of straight teeth, teeth cut right hand, teeth cut left hand for quicker cleaning and to prevent grooving of scale.

Size : Tube I. D. From 31mm to 102mm

NOTE : '2 Layer & 3 Layer tool head cutters also available in 'T' series cutters.

Serial No. Tube I. D. Tool Head Cutters Wheel
Set of 3 rollers
Spare Arms
Mm. Inch Model No. Model No. Model No.
1 31.7 1.1/4 T-10 TW-1 TA-1
2 35.0 1.3/8 T-11 TW-1 TA-1
3 38.1 1.1/2 T-12 TW-1 TA-1
4 41.3 1.5/8 T-13 TW-2 TA-2
5 44.5 1.3/4 T-14 TW-2 TA-2
6 47.6 1.7/8 T-15 TW-2 TA-2
7 51.4 2 T-16 TW-2 TA-2
8 54.0 2.1/8 T-17 TW-2 TA-2
9 57.1 2.1/4 T-18 TW-3 TA-3
10 63.5 2.1/2 T-20 TW-3 TA-3
11 70.0 2.3/4 T-22 TW-4 TA-4
12 76.2 3 T-24 TW-4 TA-4
13 82.5 3.1/4 T-26 TW-5 TA-5
14 88.9 3.1/2 T-28 TW-5 TA-5
15 95.2 3.3/4 T-30 TW-6 TA-6
16 101.6 4 T-32 TW-6 TA-6
 
Tube Cleaning Equipments - Wire Brushes
TURK HEAD BRUSH CUP SHAPE BRUSH CIRCULAR WHEEL BRUSH
TURK HEAD BRUSH CUP SHAPE BRUSH CIRCULAR WHEEL BRUSH
Max. Size of brush: 6” (152.4mm)
Purpose: For removal of light scale from pan,
evaporator, juice heaters tube.
Max. Size of brush: 6” (152.4mm)
Purpose: For cleaning more space or where
rotary brush can not be used.
Max. Size of brush: 6” (152.4mm)
Thickness: ½” to 2”
Purpose: For polishing, deburing &
cleaning of tube
 
Serial No. Size
Mm. Inch
Turk Head Brush
Model Nos.
‘NCS’ Cup Shape Brush
Model Nos.
Circular Wheel Brush
Model Nos.
1 31.7 1.1/4 NT-10 ----- NCW-10
2 35.0 1.3/8 NT-11 ----- NCW-11
3 38.1 1.1/2 NT-12 ----- NCW-12
4 41.3 1.5/8 NT-13 ----- NCW-13
5 44.5 1.3/4 NT-14 ----- NCW-14
6 47.6 1.7/8 NT-15 ----- NCW-15
7 51.0 2 NT-16 NCS-16 NCW-16
8 54.0 2.1/8 NT-17 NCS-17 NCW-17
9 57.1 2.1/4 NT-18 NCS-18 NCW-18
10 60.3 2.3/8 NT-19 NCS-19 NCW-19
11 63.5 2.5/8 NT-20 NCS-20 NCW-20
12 66.7 2.5/8 NT-21 NCS-21 NCW-21
13 69.8 2.3/4 NT-22 NCS-22 NCW-22
14 73.0 2.7/8 NT-23 NCS-23 NCW-23
15 76.2 3 NT-24 NCS-24 NCW-24
16 79.4 3.1/8 NT-25 NCS-25 NCW-25
17 82.5 3.1/4 NT-26 NCS-26 NCW-26
18 85.7 3.3/8 NT-27 NCS-27 NCW-27
19 88.9 3.1/2 NT-28 NCS-28 NCW-28
20 92.1 3.5/8 NT-29 NCS-29 NCW-29
21 95.2 3.3/4 NT-30 NCS-30 NCW-30
22 98.4 3.7/8 NT-31 NCS-31 NCW-31
23 101.6 4 NT-32 NCS-32 NCW-32
 
Next

Download PDF   Send Enquiry

 
Communication Details
Address : 107, New Modella Indl Estate, Padwal Nagar, Wagle Estate, Thane (W)-400604.
Maharashtra, INDIA. Phone : +(91)-(22 )- 67257869 / 25834539
Email : response@tubeexpandertools.com